x

Categories

Site Information

 Loading... Please wait...

DINITROL for Transport Applications

Rust Proofing For Transport Applications

Are you are looking to extend the life of your mode of transport?

The benefits of rust proofing are:

  • Extends the working life of all modes of transport
  • Reduces costly repair work
  • Simple to use and easy to apply
  • Very effective up to 4 years depending on environment
  • Does not wash off during cleaning (must follow guidelines)
  • Does not melt or drip in hot weather

Select the appropriate mode of transport and choose your rust proofing product:

Specialist Body Builders

DINITROL ML3125, 3642W
 
These Dinitrol products are a thixotropic rust preventive fluid with good film building properties for open surfaces as well as for cavities. It is capable of good penetration into crevices and joints, preventing further corrosion even on damp or dirty surfaces. Leaves a brown, waxy water repellent protective film. Super penetrating corrosion prevention. Stops existing rust.

Available in 500ml Aerosol and 1, 20, 208 litres 

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4010

Dinitrol 4010 is a long term engine protection product with heat resistance up to 200 degrees centigrade. The product leaves a firm transparent film with short drying time and good adhesion and flexibility on all metal surfaces, rubber and plastic parts. It is resistant to alkali and acidic solutions. Ideal for using under the bonnet, on hose clips and unpainted aluminium, which can corrode leaving a white powder. Suitable for spraying on all areas but avoid exhaust manifolds and down pipes. Any overspray will soon burn off.

Available in 500ml Aerosol and 1, 20, 60 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4941 (Black) 4942 (Brown)

Dinitrol 4941 and 4942 are thixotropic external underbody rust proofing fluids. They provide long term resistance against corrosion and abrasion, even under severe conditions. Provides a tough elastic waxy protective coating. The film is resistant to repair and oven paint temperatures.

Available in 500ml Aerosol and 1, 20, 60, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 81

DINITROL 81 is a transparent, hard, waxy film ideally suited as a protective coating affording easy visual inspection of the metal surface, reading of labels, numbers, etc. DINITROL 81 is intended for protection in storage and in transit, of finished surfaces of steel and of other metals, particularly when a colourless, transparent and smearless film is desired. DINITROL 81 may also be used for protection of lacquered surfaces withstanding white spirit and similar solvents, e.g. different types of tooling and equipment, engines and vehicles.

Available in 20 litre pail.

CLICK HERE for Technical and Health & Safety Data Sheets

Customers Include:

Whale Tankers, Fluid Transfer, Whittakers, Baileys, Coleman Milne, Brownhills, AMDAC Carmichael, Gwynedd County Council, Leicestershire County Council, Leyland Trucks, Millbrook Proving Ground, Schmidt UK Ltd and Gritit


Rust Treatment Products for Buses and Coaches

DINITROL ML3125 Cavity Wax

Dinitrol ML3125 is a thixotropic rust proofing fluid with good film building properties for underbody as well as for cavity box sections. It is capable of good penetration into crevices and joints, preventing further corrosion even on damp or dirty surfaces. Leaves a brown, waxy water repellent protective film. Super penetrating corrosion prevention. Stops existing rust.

It is recommended that a thin coating of cavity wax be applied to the under body prior to applying underbody wax to seal the surface and penetrate where the thicker under body will not reach.

Available in 500ml Aerosol and 1, 20, 60, 208 litres 

CLICK HERE for Technical and Health & Safety Data Sheets 

DINITROL 4942 (Brown) Underbody Wax

Dinitrol 4942 is a thixotropic external underbody rust preventive fluid which provides long term resistance against corrosion and abrasion wear, even under severe conditions. Provides a tough, elastic, waxy protective coating. The film is resistant to repair and oven paint temperatures.

Available in 500ml Aerosol and 1, 20, 60, 208 litres  

CLICK HERE for Technical and Health & Safety Data Sheets 

DINITROL 8542 H

DINITROL 8542 H is a quick-drying acrylic bonding agent which has been specially developed to meet the requirements in the bus, commercial vehicle and industrial sectors.

Application: DINITROL 8542 H is used for adhesion, promoting pre-treatment when renewing protection on old under seal with factory coatings containing solvents.

Pre-treatment of the contact surface: The contact surface must be clean and free from grease, dust and rust. All weathered paints must be removed. Sound lacquers must be ground mat. In the case of absorbing contact surfaces, e.g. wood, a pore sealer should be pre-applied to prevent the bonding agent from migrating into the contact surface This product must be used as a pre-treatment when renewing water based waxes with solvent based ones.

CLICK HERE for Technical and Health & Safety Data Sheets

Customers Include:

Wrightbus, Optare, Alexander Dennis, Van Hool, Neoplan, First Group, Arriva, MAN, Mellor, National Express, Brighton & Hove Bus and Coach. 

Rust Treatment For MOD Applications

Choose Your Product:

DINITROL 4942

Dinitrol 4942 is a thixotropic external underbody rust preventive fluid, which provides long term resistance against corrosion and abrasion, even under severe conditions. Provides a tough elastic waxy protective coating. The film is resistant to repair and oven paint temperatures.

Available in 500ml Aerosol and 1, 60, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4942M

Dinitrol 4942M is a product identical to standard 4942 but with a 15% higher solid content.

Available in 208 litre drum

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 3650

Dinitrol 3650 is designed for application in closed cavities, doors and other parts of cars, trucks and buses. The product is particularly suitable for use at import plants, during truck and bus manufacture and in the Aftermarket. It is also designed for use on spare parts etc., which are stored for long periods or transported under very corrosion inductive weather conditions.

Available in a 208 litre drum.

CLICK HERE for Technical and Health & Safety Data Sheets

Customers Include:

MOD, Marshall Vehicle Engineering, BAE Landsystems, Defence Support Group, Commercial & Military 

Ships and Boats

Are you are looking for the ultimate protection against corrosion?

Dinitrol rust prevention products as listed below are suitable for marine and architectural rigging; for use on all metal rigging, anchors, chains, cable, wire rope, winches, standing rigging plus metal hawser wires, window frames, guard wire fittings, wiper arms and spindles and other rust prone surfaces.

Choose Your Rust Treatment Product

DINITROL ML3125, 3642W

These Dinitrol products are a thixotropic rust preventive fluid with good film building properties for open surfaces as well as for cavities. It is capable of good penetration into crevices and joints, preventing further corrosion even on damp or dirty surfaces. Leaves a brown, waxy water repellent protective film. Super penetrating corrosion prevention. Stops existing rust.

Available in 500ml Aerosol and 1, 20,  208 litres 

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4941 (Black) 4942 (Brown)

These Dinitrol products are a thixotropic external underbody rust preventive fluid, which provides long term resistance against corrosion and abrasion, even under severe conditions. Provides a tough elastic waxy protective coating. The film is resistant to repair and oven paint temperatures.

Available in 500ml Aerosol and 1, 20, 60, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 485

Dinitrol 485 is a quick drying corrosion protector and preservative. It is opalescent and dries to a non-sticky film. A smooth or coarse finish can be obtained depending on the method of application. It is recommended for use on panel overlaps, grooves and spot welding seams in the engine compartment; shock absorber mountings and water gutters. Machine parts, equipment, garden and agricultural tools can be temporarily protected from rusting by using this Corrosion Protection Wax. It does not attack paints used on cars, adheres to nearly all base materials, is electrically non-conductive and odourless once the solvent has evaporated.

Available in 500ml Aerosol and 20 litre can

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4010

Dinitrol 4010 is a long term engine protection product with heat resistance up to 200 centigrade. The product leaves a firm transparent film with short drying time and good adhesion and flexibility on all metal surfaces, rubber and plastic parts. It is resistant to alkali and acidic solutions. Ideal for using under the bonnet, on hose clips and unpainted aluminium, which can corrode leaving a white powder. Suitable for spraying on all areas but avoid exhaust manifolds and down pipes. Any overspray will soon burn off.

Available in 500ml Aerosol and 1, 20, 60 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL VCI UNI 0-40

This Dinitrol product is a rust preventative oil with unique characteristics. It contains a VCI-inhibitor. In closed cavities the inhibitors are released by vapour over a long period of time. This is the perfect protection for fuel tanks, gearboxes and similar closed cavities.

Dinitrol VCI UNI 0-40 protects iron, steel, copper, brass and other metals without contact with the metal surface. Add 3-4 litres Dinitrol VCI UNI 0-40 to each m³ air.

Dinitrol VCI UNI 0-40 is an oil (concentrate), which is completely mixable with petrol, oil and diesel. It burns without leaving any ash. It is, therefore, not necessary to remove the Dinitrol VCI UNI O-40, when starting up an engine. Supplied to Royal Navy for rust protection of Turbines during shutdown and maintenance of ships and submarines. 

Available in a 20 litre pail

CLICK HERE for Technical and Health & Safety Data Sheets

Customers Include:

Nav Fleet Logistics, Royal Navy, Rolls-Royce Power Engineering, Barge Restoration

Trains and Trams

Choose your rust treatment product

DINITROL 410UV

DINITROL 410 UV is a one component polyurethane sealing and adhesive compound. It is fast drying, elastic and can be over-painted. Immediate over-painting is possible - wet on wet - however, do not use paint with alcohol or alkyd-resin. Used for attaching plastic body panels, spoilers, body kit, scoops and vents to bodywork.  UV resistant.

Available in Black or White 310ml tube

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL ML

Ideal transportation wax. Has corrosion preventive fluid with excellent penetration. When the solvent has evaporated, the product leaves a beige and soft protective film. Can be removed with traffic film remover.

Available in 500ml Aerosol and 1, 20, 60, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4942

Dinitrol 4942 is a brown thixotropic external underbody rust preventive fluid, which provides long term resistance against corrosion and abrasion, even under severe conditions. Provides a tough elastic waxy protective coating. The film is resistant to repair and oven paint temperatures.

Available in 1 Litre, 60, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

CUSTOMERS INCLUDE:

Bombardier, TFL, Bailey Rail, Eurostar, Brush Traction, Scottish Railway Preservation, Blackpool Transport, Thomas – The Tank Engine at Nene Valley and Knorr-Bremse 

Aircraft

DINITROL ML3125

It is a thixotropic rust preventive fluid with good film building properties for open surfaces as well as for cavities. It is capable of good penetration into crevices and joints, preventing further corrosion even on damp or dirty surfaces. Leaves a brown, waxy water repellent protective film. ML3125 is a super penetrating corrosion prevention which stops existing rust.

Available in 500ml aerosol and 1, 20, 60, 208 litres 

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4941

Dinitrol 4941 is a black, thixotropic external underbody rust preventive fluid, which provides long term resistance against corrosion and abrasion, even under severe conditions. Dinitrol gives a tough, elastic, waxy protective coating. The film is resistant to repair and oven paint temperatures.

Available in 500ml Aerosol and 1, 20, 60 and 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 4010

Dinitrol 4010 is a long term engine protection product with heat resistance up to 200 degrees centigrade. The product leaves a firm transparent film with short drying time and good adhesion and flexibility on all metal surfaces, rubber and plastic parts. It is resistant to alkali and acidic solutions. Ideal for using under the bonnet, on hose clips and unpainted aluminium, which can corrode leaving a white powder. Suitable for spraying on all areas but avoid exhaust manifolds and down pipes. Any overspray will soon burn off.

Available in 500ml Aerosol and 1, 20, 60 litres

CLICK HERE for Technical and Health & Safety Data Sheets

Rust Treatment Products for LTI Taxis

Are you are looking to extend the life of your fleet?

The benefits of rust treating your fleet are:
Extends the working life of a vehicle
Reduces costly repair work
Simple to use and easy to apply Very effective up to 4 years depending on environment
Increases re-sale value and makes it easier to sell
Does not wash off during cleaning (must follow guidelines)
Does not melt or drip in hot weather

Choose Your Rust Treatment Product:

DINITROL 4941 (Black)

Dinitrol 4941 is a thixotropic external underbody rust preventive fluid, which provides long term resistance against corrosion and abrasion, even under severe conditions. Provides a tough elastic waxy protective coating. The film is resistant to repair and oven paint temperatures.

Available in 500ml Aerosol and 1, 20, 60, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets
 
DINITROL 3642W

DINITROL 3642W is designed for application in cavities as well as on clean, dry open surfaces. Mostly used on new cars, trucks and buses. The product is particularly clean to use at import plants as well as in the aftermarket. The thixotropic nature of the product ensures an evenly applied film in the required thickness and strength.

Available in 20, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

DINITROL 3654

Dinitrol 3654 is designed for application in closed cavities, doors and other parts of cars, trucks and buses. The product is particularly suitable for aftermarket re-treatment of vehicles for which Dinitrol was used during manufacture. It is also designed for use on spare parts etc, which are stored for long periods or transported under very corrosion inductive weather conditions.

Available in 1, 208 litres

CLICK HERE for Technical and Health & Safety Data Sheets

Customers Include:

The London taxi Corporation for production line and re-treatment

What Does Thixotropic Mean?

Thixotropic means that the wax skins over but remains soft underneath allowing for expansion and contraction of the surface it is applied to. It is also self healing, meaning that if it is chipped by a stone it will migrate across to repair the damage.

Another example is that of toothpaste, which allows it to be squeezed out of the tube, yet retain a solid shape on the brush.